My Cart: 0 item(s)
Description
Instructions
Reviews
Bike Fitment
Description
Wunderlich Manifold Protection, Heat Shield, Carbon Fiber
Heat shield made of real carbon. And since quality is everything to us, we have the protective cover exclusively from Ilmberger, Carbon specialists, manufacture for us. It is a strong yet lightweight cover that serves as thermal and mechanical protection to reliably isolate the radiant heat from the rear cylinder manifold and to prevent direct contact of the right lower leg with the hot manifold pipe. We have made our carbon heat shield over 130 millimeters longer than the series plate for good reasons. It thus protects against painful burn injuries and prevents damage to the protective clothing due to thermal influences. At the same time, it offers a high mechanical protection against scratches or dents for the manifold, which can occur when driving off-road or in the event of an unfortunate fall. The heat protection is constructed in one piece and is mounted thermally decoupled, so touches remain without consequences. Functional, integrated design with a carbon adventure look. The organic shape follows the course of the manifold fluently, so that it fits perfectly into the lateral flow of the Pan America. Precise assembly using the enclosed assembly kit is extremely easy. The heat protection replaces the original series part.
This carbon part replaces the original component using the original attachment points. An advantage is the weight saving (usually there is a saving of approx. 70% compared to the original component) and the higher component rigidity.
Ilmberger uses pre-impregnated carbon fiber matrices for the high-quality carbon. The fiber volume is dimensioned and the alignment of the individual fiber layers is defined. The matrix is then hand-laminated without bubbles and covered twice with a protective coating. The additional clear coat of paint protects and emphasizes the three-dimensional effect of the carbon structure. After hardening in the autoclave, the carbon components meet the highest standards and the highest demands.
The aerospace material shows its full potential with a weight saving of up to 70% compared to the series part and with its weight-specific rigidity. The form always follows the function and is optimally integrated into the design of the motorcycle. The lines of the respective machine as well as the material and the surface texture of adjacent series components are taken into account. This carbon component underlines the high-tech claim with the unique appearance of real carbon.
Function
This carbon part replaces the original component using the original attachment points. An advantage is the weight saving (usually there is a saving of approx. 70% compared to the original component) and the higher component rigidity.
Ilmberger uses pre-impregnated carbon fiber matrices for the high-quality carbon. The fiber volume is dimensioned and the alignment of the individual fiber layers is defined. The matrix is then hand-laminated without bubbles and covered twice with a protective coating. The additional clear coat of paint protects and emphasizes the three-dimensional effect of the carbon structure. After hardening in the autoclave, the carbon components meet the highest standards and the highest demands.
The aerospace material shows its full potential with a weight saving of up to 70% compared to the series part and with its weight-specific rigidity. The form always follows the function and is optimally integrated into the design of the motorcycle. The lines of the respective machine as well as the material and the surface texture of adjacent series components are taken into account. This carbon component underlines the high-tech claim with the unique appearance of real carbon.
Function
- High quality thermal and mechanical protection
- Made of real carbon - solid, yet light
- Because we put quality above everything - manufactured exclusively by Ilmberger, the carbon specialist
- For a good reason: we made the carbon heat shield over 130 mm longer than the series plate
- Reliably shields the radiant heat of the rear cylinder manifold
- Prevents direct contact of the lower leg with the hot manifold
- Protects against painful burn injuries and prevents damage to protective clothing due to thermal influences
- In addition: High mechanical protection against scratches or dents in the manifold pipe
- Integrated design in the carbon adventure look - the organic shape follows the course of the manifold
- Stable and durable construction
- We use the original screw points for easy attachment.
Technical data
Material
- Real carbon, exclusively high-quality and carefully manufactured by Ilmberger
Color
Your Wunderlich benefits- Carbon colored
- Small series. Made by hand.
- Functional and integrated.
- Exclusively by Wunderlich
- Made in Germany
Wunderlich
90190-000
Reviews
Write a review
1
0
0
0
0
Tony W (Toronto area) | October 19th, 2024
I recently bought the carbon finer exhaust shield, the lowered footpegs, the radiator hose guard, and the kickstand spring. All of these took me less than and hour to install. Super easy. Really happy with all of them. The carbon finer exhaust shield also just looks super cool.
Popular Products
Bike Fitment
Harley-Davidson
Pan America
2021
· 2022
· 2023
· 2024
Harley-Davidson
Pan America Special
2021
· 2022
· 2023
· 2024