My Cart: 0 item(s)
R nineT Low Tail Conversion Kits
Select your Bike Year & Model and then scroll down to view the kits & parts to get started!
We have created R nineT Low Tail Conversion Kits section to help you transform your R nineT with this classic retro style. The license plate is attached onto the final drive for unobstructed view of the rear wheel. Three different kits with 3 different style tail lights
Use your original indicators or change out to LED indicators.
Just a few steps
- Choose Low Conversion Kit Style
- Add optional LED indicators
- Add any additional accessories if needed
Low Standard Conversion
Fits the following models:- R nineT
- R nineT Scrambler
- R nineT /5
- R nineT Pure
- R nineT Urban G/S
Low Stripe Conversion
Fits the following models:- R nineT
- R nineT Scrambler
- R nineT /5
- R nineT Pure
- R nineT Racer
- R nineT Urban G/S
Low Devil Conversion
Fits the following models:- R nineT
- R nineT Scrambler
- R nineT /5
- R nineT Pure
- R nineT Racer
- R nineT Urban G/S
Tail Conversion Std. Low
Part #44111002
This Tail Conversion Kit houses the LED tail light (European version) and cleans up the tail and relocates the license plate to the final drive.
LED Tail Light P/N 6321000 required if your R nineT is a U.S. version.
US License Plate Adapter Required
Tail Conversion Stripe - Low
Part #44111102
This Tail Conversion Kit replaces the original tail light of the R nineT with a LED strip light and cleans up the tail and relocates the license plate to the final drive.
US License Plate Adapter Required
Tail Conversion Devil Low, Black
Part #44111202
This Tail Conversion Kit replaces the original tail light of the R nineT with a LED Devil tail light and cleans up the tail and relocates the license plate to the final drive.
US License Plate Adapter Required
View Full Product
★★★★★
US License Plate Adapter
Part #38981444
This adapter has been designed for mounting US license plates to the Wunderlich license plate brackets.
M-Pin Turn Signal Set
Part #38983002
Very beautifully designed and puristic indicator from Motogadget for our tail conversions. Easy and stable mounting on the licence plate holder. The mo.blaze Pin from motogadget sets new benchmarks for add-on indicators with Power LED technology. Its minuscule dimensions and the reduced design mean it almost disappears when mounted on the vehicle.
Includes Built in Resistors
Turn Signal - Kellermann Bullet 1000
Part #7050320-28
The Bullet 1000® DF is a rear indicator in combination with a rear running lights and brake light function. It replaces the existing turn signal indicators, and can be utilized for the brake and rear running light. The light of the continuously glowing red rings give the tail of the motorcycle a spectacular look.
Resistors are not included.
Torpedo Turn Signal Set, Rear
Part #44300000
Classical, little indicators with a small, but very bright light
surface. Match very well with Wunderlich's rear light "DEVILS-EYE" kit.
Resistors not included.
Torpedo Turn Signal Set, Front
Part #44300100
The matching front indicators for the Torpedo LED indicators.
Resistors not included
Bullet Turn Signal Set - Black
Part #36340402
Classic, discreet halogen indicator with high light yield with low power consumption.
Can be used as Front or Rear Indicators.
No Resistors required
View Full Product
★★★★★
Turn Signal Adapter Set
Part #44960002
The adapter allows for the installation of the most common accessory turn signal, which is fastened using a threaded screw, to the original BMW turn signal attachment.
View Full Product
★★★★★
Resistor Harness 5W 39 Ohm
Part #44109400
Thanks to the practical wiring adapter set with a built in
resister and with standard plugs, there's no longer any need for
soldering work on the cables because the plugs are compatible with the
original plugs. This means all conversion works can also be quickly
undone again with no additional effort. To be used when converting to
LEDs.
Resistor 5w - 39 Ohm
Part #2057413
When LEDs are used instead of the stock bulb option, it can happen that the on-board computer shows "defective lamp" or the LED will not work properly causing the flash sequence to flash irregularly due to the low power consumption. By using the load resistance, the failure report at the on-board computer is avoided and the LED will operate as intended.