Part # 26660300
Wunderlich Folding Headlight Guard

This is a must have accessory, typically made well and easy enough to fit. My two very small complaints with it are: 1, The Self Locking Nuts that are supplied to attach the “Studs” for the quick release sockets, are far too stiff to fit to the Plastic stud. There is no way to hold the stud without damaging it while doing up the nuts. I replaced these with standard nuts and spring washers. 2, If at all possible, could the hinge points have been designed to be Behind the guard rather than out in front. Just a small issue, but it may have looked better.. Fast and efficient delivery to NZ. Thankyou.

These are a must have item, which provides great protection to your headlight. They are well made, with a typical top quality Wunderlich finish. Yes the fitting instructions are somewhat vague, but easy enough to follow, when all of the parts are laid out and the bike in front of you. The only fault I found, was that the self locking nuts provided to attach the quick release “Studs”, are too stiff for the plastic studs they hold, requiring a very high torque to fit. I ended up discarding these nuts and replacing with standard nuts and spring washers. As far as aesthetics go, I wonder if it would have been possible to put the hinge points “behind” the lense, rather than out in front? Otherwise this is a very good product. Quick delivery to N.Z. as well.

I ordered and installed the Wunderlich headlight guard on my 2019 BMW R1250GS and I must say that it is an incredible piece of engineering just like the bike. The four-point mounting ensures that the frame is secure, the lens benefits from a metal surround and it is hinged at the bottom to allow it to pivot out of the way for easy headlight lens cleaning. It is secured in place with two rubber grommets that plug onto two male adapters at the top ensuring a secure fit. Now the bad news... like other Wunderlich products, the instructions relay almost exclusively on images and photos to show how the unit is assembled. Given the number of parts and limited level of detail, these are incomplete at best and I had to rely on a BMW technician who had installed these before in order to correctly assemble the device. Also, if your BMW R1200GS/R1250GS is equipped with auxiliary lights, the bolts that are provided won't work and the longer bolts required are not supplied -- another reason that the BMW technician had to come to my rescue. These two latter issues are the only reason I "dinged" this product from receiving a 5-star rating -- otherwise the construction is absolutely superlative.