My Cart: 0 item(s)
Description
Instructions
Reviews
Video
Accessories
Bike Fitment
Description
Integrated GPS Mount
With this part you'll be able to place your GPS in plain view and without obscuring any of the instruments or display information. Without the need to make the dangerous move of taking your eyes off the road for more than an instant, even in complicated traffic situations, a quick glance is now possible.
The two existing mounting points that we use to attach the bracket would normally not provide enough support for a GPS unit. Therefore our strong bracket design features a supplemental support that strengthens the mounting points from below, resulting in a rock solid integration.
Other methods of mounting your navigator are often times a compromise, for example there's typically interference with a tank bag or access to the ignition key is hindered.
Some Facts:
• Your GPS is in the optimal field of vision
• Better, safer navigation
• Solid support for your GPS due to elaborate reinforcement
• Easier reach to the screen and GPS controls
• Adjustable: position your GP at any desired angle
• Easy installation with no drilling or other modifications to your bike
• Lightweight, anodized aluminum
• Compatible with most GPS units: TomTom Rider I & II, BMW Navigator, Garmin Zumo, All units that utilize the claw adapter, Any PDA (combined with our Mediabag) Camera, video recorder.......
• Compatible with a Garmin Nüvi 500 series in conjunction with the adapter kit, part number 8600808 (available under the Related Products.
• Complete installation kit with clear instructions
• Made in Germany
Perhaps it's not immediately noticeable, but a great deal of effort was invested in the design and to make this part easy to install.
Wunderlich
21170-000
Important fitment note: For 2010 and later models, part number 8600888 is needed. Available under the Related Products.
Please Note: If you have a Garmin 660, please check the back of the cradle. If the back of the cradle is stepped where the power wire exits, you should additionally order 4 of the rubber mounts that are available under the related products. Alternatively, you can use 4 - 10mm spacers that you may be able to make or acquire locally.
Instructions
Reviews
Write a review
Currently Viewing Reviews with a rating of 4. Click here to reset.
33
5
1
0
0
Michael Somerville | December 13th, 2021
I noted previous reviews that indicated some installation difficulties, but decided to purchase anyway. As others have noted, the printed instructions could be a bit clearer, especially regarding the exact placement of the support bracket. However, I figured it out easily enough, and overall it was a pretty simple install. I removed the windscreen for easier access which made the process almost trivial. It seems very well made, all the holes lined up and the fasteners were perfect, other than color. I would have preferred black anodized screws/nuts. Some nit picks for Wunderlich to consider. 1. Mount head could use greater range of motion. 2. The Felt adhesive padding could be pre-cut to fit the shape of the base of the mount. 3. The screws are too soft. Seems like everything nowadays ships with metal fasteners that aren't hardened. Screw heads started stripping out almost immediately during installation. Other than that, I highly recommend.
Bruno Lavoie | May 24th, 2020
Very well made mount, easy to install, places the gps in a perfect location and no vibration whatsoever. The only reason for the 4 stars is that the power cable on my garmin 396 is off to the side as opposed to the center and I had to cut a small notch in the bracket so the cable would fit throuh the bracket.
Bob Wilson | April 13th, 2020
I based my purchase decision on Wunderlich's reputation for quality and on the claim that the location of the GPS on the bike would provide a safe, convenient, and unobscured line of sight once installed. The installation itself proved to be very difficult and took several hours. My problem was securing the support bracket that goes under the dash. There's very little room in that space for hands, tools and fasteners all at once. Getting the two fastening points to stay in perfect alignment so as to be able to insert the fasteners through the layers of dash trim to the support bracket was what took so much more time and effort than I anticipated. But once I got it finished, I was very pleased. This is a quality product, well made and thoughtfully designed. Nothing was missing, and nothing left over.
Show All Reviews
Product Videos
Related & RecommendedProducts
Popular Products
Bike Fitment
BMW R1200 RT
2005
· 2006
· 2007
· 2008
· 2009